https://embeddedlinux.blog/en/series/yocto-mx93/Recent content in Yocto-MX93 on Embedded Linux BlogHugoenMon, 09 Feb 2026 22:20:20 +0700https://embeddedlinux.blog/en/2026/02/07/yocto-mx93-2-ket-noi-wifi-test-thu-chromium/Sat, 07 Feb 2026 07:34:09 +0700https://embeddedlinux.blog/en/2026/02/07/yocto-mx93-2-ket-noi-wifi-test-thu-chromium/<p>One nice thing about using the vendor's full-featured image is that adding things is quite simple, and there is plenty of documentation from the vendor too</p> <h2 id="1-adding-chromium-to-the-build">1. Adding Chromium to the build</h2> <p>First, as I said in the previous post, to avoid editing local.conf and bblayers and then having those 2 files reset when you run source, we first run the following command to initialise the build environment</p>https://embeddedlinux.blog/en/2026/01/31/yocto-mx93-1-build-imx-image-full-cho-frdm-i-mx93/Sat, 31 Jan 2026 22:07:48 +0700https://embeddedlinux.blog/en/2026/01/31/yocto-mx93-1-build-imx-image-full-cho-frdm-i-mx93/<p>In the Yocto series for the Beaglebone Black and STM32MP157 I did a lot of basic features, how to use yocto, working up from core-image-minimal. This time I build the features for the FRDM i.MX93 board starting straight from the vendor's full image.</p>